(Direct Link) Tenda Router Firmware Upgrade W150D (V3.0 / V5.0)

                                

Firmware
Download | W150D (V3.0) Firmware V1.0.1_EN
Download | W150D (V3.0) Firmware V1.0.0_EN
Download | W150D (V3.0) Firmware V1.0.0.4(For New Zealand/Australia)
Download | W150D (V3.0) Firmware V1.0.0.3(For New Zealand PPPoA)

Download | W150D (V5.0) Firmware V1.1.0.10_EN

Tenda  W150D Wireless Router Specifications:
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 3 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless bridge (PtP)
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna gain: 5 dBi
 WPS (Wi-Fi Protected Setup): yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: n/a
 Default admin password: n/a
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes